Digital Fuel Guage
FU60 Digital Fuel Gauge
and Fuel Consumption
9.5 - 33.0 VDC
0.018 amps nominal
Better than 2% (trainable)
Fuel level data editor.
Fuel sender resistance data editor.
Data editor can be used to manually enter fuel calibration data or to correct an existing calibration curve.
4 digit LCD, 5 levels of backlighting
Fuel remaining, trip fuel used, total fuel used, consumption rate (gal/liters per hr), Time-To-Go (at current consumption rate) before fuel gone.
Works with all popular fuel senders, both American and European standards (Centroid, Faria, GM, VDO, Teleflex, Stewart-Warner, etc.) The FU60 digital fuel gauge is manufactured to work with any standard resistance type level sender having the following resistance ranges: 0-30, 0-70, 0-90, 10-73, 10-180, 33-240, 40-250 ohms (and their reverse 30-0, 70-0, 90-0, 73-10, 180-10, 240-33, 250-40 ohms). The FU60 will actually also work with any non-standard resistive sender that varies from a minimum of 0 ohms to a maximum of 300 ohms or a maximum of 300 ohms to a minimum of 0 ohms. For example, a resistive sender that varies in resistance from 100 to 150 ohms would work. So would a sender that varies from 75 ohms to 25 ohms. The FU60 can also be ordered from the factory set to work with 4-20mA senders or 0-5V sender, as a special order item.
Output screw terminal user programmable for choice of:
NMEA 0183 serial
External Alarm Output
Day tank fuel transfer pump control
NMEA 0183 Data:
Trip Fuel Used
Total Fuel Used (Required to fill the tank)
Fuel Consumption Rate
Time to Go (before you run out of fuel)
Built-in 85 dB audible alarm. Settable Low and High fuel alarms
Fuel Transfer Pump Control:
Programmable lower fuel level limit to turn ON a fuel transfer pump.
Programmable upper fuel level limit to turn OFF the fuel transfer pump.
2.5" dia X 4.1" deep (61mm x 104mm)
2-1/8" (55mm) round hole